Innovative IQ Mapping technology (JASCO patent)
IQ Mapping uses the same mechanism as the 2D laser scanning function by galvano mirror equipped in laser microscope, allowing transmission/reflection mapping measurement through 2D scanning of infrared light on the sample. Since this function enables to perform the ATR mapping during contact of the sample with ATR crystal, there is no cross-contamination. The ClearView ATR cassegrain (ATR-5X-SD) allows the sample observation while in contact with ATR crystal, enabling point measurements after properly selecting the location.
The following pictures shows the ATR mapping measurement results of glitter in cosmetics by using ClearView ATR cassegrain (ATR-5X-SD)
Observation image
(before contacting sample with ATR crystal)
Observation image
(after contacting sample with ATR crystal)
Chemical image
Powerful IQ Duo MCT detector and 4 detectors capability
Standard midband MCT detector can perform IR measurement in low wavenumber range, down to 550 cm-1. IRT-5X supports the simultaneous installation of multiple detectors (up to 4 detectors*). IQ Duo MCT detector, DLATGS detector and InGaAs detector can be installed to IRT-5X and switched by software.
*When installing IQ Duo MCT detector, up to 4 detectors can be controlled.
